Automodelista

Enviado: **sexta mar 24, 2006 9:15 pm**

Alessandro, your work amazes me! I've seen your half cut Enzo and Testarossa...MY GOD! absolutely amazing.
I'm very proud to have you here on our forum!

"Bestest of best" Regards,
Pedro.

Enviado: **segunda mar 27, 2006 3:03 pm**

Petter Escreveu:Alessandro, your work amazes me! I've seen your half cut Enzo and Testarossa...MY GOD! absolutely amazing.
I'm very proud to have you here on our forum!

"Bestest of best" Regards,
Pedro.

Thank you Pedro !

Alessandro

Enviado: **segunda mar 27, 2006 3:05 pm**

The seat. I gently milled the seat area, not the back, and then I sprayed from long distance some matt black. This is the first time I try this technique and I’m satisfied with it. The back has been covered with BBR carbon decals and clear coated with X-22 Tamiya. Seat belts are a mix of black tape and logos from Modeler’s, red clothed tape from Tesa for the belts paddings and etched seat belts buckles from Scale Production SPE24007.
Alessandro

Imagem

Enviado: **terça mar 28, 2006 12:49 am**

SHOW

Enviado: **terça mar 28, 2006 8:42 am**

Very good!!!

you're doing a great job...

Enviado: **terça mar 28, 2006 9:52 am**

Excelent job!
What´s that white stuff in the seat that you milled? Looks like you rubbed some cotton on it...

Enviado: **terça mar 28, 2006 12:14 pm**

dias Escreveu:Excelent job!
What´s that white stuff in the seat that you milled? Looks like you rubbed some cotton on it...

It's the resin which turned white under the milling.
Alessandro

Enviado: **terça mar 28, 2006 1:44 pm**

Err... sorry.

I didn´t know since i never worked with a resin kit.
But it really looks like flufy cotton...

Enviado: **terça mar 28, 2006 4:03 pm**

Interiors are nearly completed. Alessandro

Enviado: **terça mar 28, 2006 6:09 pm**

AMAZING!!!!!

Enviado: **terça mar 28, 2006 10:08 pm**

!!!!!!!!!!!!!!!!!!!!!!

Enviado: **terça mar 28, 2006 11:33 pm**

Fantastic job.

Loved the interior with all the wiring. You have the modeling skill called Attention to detail. The wire in the seat is suberb...

Enviado: **quarta mar 29, 2006 9:46 am**

Just beutiful!!

Enviado: **sábado abr 08, 2006 4:20 pm**

Hi and thank you for the comments, a very little step ahead. The rear wing is really well done but for the Le Mans version it needs to be shortened of approx. 5 mm each side, so I traced two lines on the wing and cut the two portions. The wing drift and supports have been sprayed with semi-gloss black and covered with BBR carbon decals. Wing element has been primed matt white, painted with gloss white and, after the decals, matt coated with alkyd matt clear.

Have a nice weekend. Alessandro

Enviado: **sábado abr 08, 2006 9:49 pm**

Whooo... what a clean job on that wing.

Automodelista

Progress: Tecnomodel 1/24 Ferrari 575 GTC